Heated Mirrors - If Equipped; Tilt Side Mirrors In Reverse - If Equipped; Illuminated Vanity Mirrors - If Equipped - Dodge CHARGER 2020 Owner's Manual

Hide thumbs Also See for CHARGER 2020:
Table of Contents

Advertisement

44
GETTING TO KNOW YOUR VEHICLE
NOTE:
A light in the select button will illuminate indi-
cating the mirror is activated and can be
adjusted.
Using the mirror control switch, push on any of
the four arrows for the direction that you want
the mirror to move.
H
M
— I
E
EATED
IRRORS
F
QUIPPED
These mirrors are heated to melt frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped). Refer to "Climate
Controls" in this chapter for further information.
T
S
M
I
R
ILT
IDE
IRRORS
N
EVERSE
E
QUIPPED
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver's view of the ground rearward of the front
doors. The outside mirrors will move slightly
downward from the present position when the
vehicle is shifted into REVERSE. The outside
mirrors will then return to the original position
when the vehicle is shifted out of the REVERSE
position. Each stored memory setting will have an
associated Tilt Side Mirrors In Reverse position.
NOTE:
The Tilt Side Mirrors In Reverse feature is not
turned on when delivered from the factory. The
Tilt Side Mirrors In Reverse feature can be
turned on and off using the Uconnect System.
Refer to "Uconnect Settings" in "Multimedia"
for further information.
I
V
LLUMINATED
ANITY
E
QUIPPED
An illuminated vanity mirror is located on the
sun visor. To use the mirror, rotate the sun visor
downward and swing the mirror cover upward.
The light turns on automatically. Closing the
mirror cover turns off the light.
— I
F
Illuminated Vanity Mirror
"Slide-On-Rod" And Extender Features Of
Sun Visor
To use the "Slide-On-Rod" feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
grab the sun visor and pull rearwards until the
sun visor is in the desired position. To use the
extender feature of the sun visor, grab the
M
— I
IRRORS
F
extender which is located at the rear of the visor
and pull rearward.
Slide-On-Rod Feature

Advertisement

Table of Contents
loading

Table of Contents