Head Restraints; Reactive Head Restraints - Front Seats - Dodge CHARGER 2020 Owner's Manual

Hide thumbs Also See for CHARGER 2020:
Table of Contents

Advertisement

38
GETTING TO KNOW YOUR VEHICLE
Press the ventilated seat button
time to turn the ventilated seat off.
NOTE:
The engine must be running for the ventilated
seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start,
the ventilated seats can be programmed to
come on during a remote start.
This feature can be programmed through the
Uconnect system. Refer to "Uconnect Settings"
in "Multimedia" for further information.

HEAD RESTRAINTS

Head restraints are designed to reduce the risk
of injury by restricting head movement in the
event of a rear impact. Head restraints should
be adjusted so that the top of the head restraint
is located above the top of your ear.
a third
WARNING!
All occupants, including the driver, should
not operate a vehicle or sit in a vehicle's seat
until the head restraints are placed in their
proper positions in order to minimize the risk
of neck injury in the event of a crash.
Head restraints should never be adjusted
while the vehicle is in motion. Driving a
vehicle with the head restraints improperly
adjusted or removed could cause serious
injury or death in the event of a collision.
NOTE:
Do not reverse the head restraints (making the rear
of the head restraint face forward) in an attempt to
gain additional clearance to the back of your head.
R
H
EACTIVE
EAD
S
EATS
The front driver and passenger seats are
equipped with Reactive Head Restraints (RHR).
In the event of a rear impact, the RHR will
automatically extend forward minimizing the
gap between the back of the occupant's head
and the RHR.
R
— F
ESTRAINTS
RONT
The RHR will automatically return to their
normal position following a rear impact. If the
RHR do not return to their normal position, see
an authorized dealer immediately.
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint,
push the adjustment button located at the base
of the head restraint and push downward on the
head restraint.
Adjustment Button
1 — Release Button
2 — Adjustment Button

Advertisement

Table of Contents
loading

Table of Contents