Home Decorators Collection HDVB4801 Assembly Instructions Manual page 10

Assembly (Option#2)
1
Unpaking the countertop
□ Unpack the countertop (A) from its vanity (B)
and place it on a throw rug or other protective
floor covering material to prevent damage to the
countertop (A) or floor.
□ Tear off the protective foam above the vanity (B).
DANGER: You will need at least two people to assemble
this product properly.
CAUTION: During the unpacking and the handling of this
vanity, note that the countertop is not pre-glued to the
frame.
B
A
2
Installing support bars
□ Measure the height (d) at where the vanity will be
located, as illustrated.
□ Add 19-3/4" (502mm) to the height (H1), this
calculated measure is the distance of the bottom of
the 2 support bars to the floor, as illustrated below.
Mark the bottom position of the 2 support bar (E) on
the wall.
H1
10 HOMEDEPOT.COM/HOMEDEPOT.CA/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
E
Support
bar