Using Tel Reception Mode - Sharp FO-50 Operation Manual

Using TEL Reception Mode

RESOLUTION
RECEPTION MODE
When the reception mode is set to TEL, you must answer all calls by
picking up the fax machine's handset or an extension phone connected
to the same line.
Answering with the fax's handset
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
Beep
All manuals and user guides at all-guides.com
To select TEL mode,
press the RESOLUTION/
RECEPTION MODE key
until the arrow in the
display points to TEL.
RECEIVING
Note: If you have set the Fax Signal
Receive setting to NO, press the
START key to begin reception.
Using TEL Reception Mode
TEL FAX
TEL/FAX A.M.
59