Sharp FO-50 Operation Manual page 52

Direct Keypad Dialling
You can also enter a full number with the number keys and then press
the START key to begin dialling. You can use this method to dial a
full number when you don't need to speak to the other party before
faxing.
1
Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric
keys.
• If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
3
Check the display. If the number of
the receiving machine shown is
correct, press the START key.
• If it is not correct, press the STOP
key to backspace and clear one
digit at a time, and then re-enter the
correct digit(s).
All manuals and user guides at all-guides.com
Sending a Fax by Automatic Dialling
RESOLUTION/
RECEPTION MODE
2 2 4
3
START
5 6 7
(Example)
51