Sharp FO-50 Operation Manual page 18

Connecting the power cord
Plug the power cord into a 230-240 V, 50 Hz, earthed (3-prong) AC
outlet.
Caution:
When disconnecting the fax, unplug the telephone line cord before
unplugging the power lead.
♦ The mains outlet (socket-outlet) should be installed near the equip-
ment and be easily accessable.
The machine does not have
a power on/off switch, so
the power is turned on and
off by simply plugging in or
unplugging the power cord.
Note: If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for the power and
telephone lines. Surge protectors can be purchased at most telephone spe-
cialty stores.
Moving your fax and reconnecting
Should it be necessary to move your fax to a new location, first
disconnect the telephone line cord before disconnecting the power
cord. When reconnecting, it is necessary to connect the power cord
before connecting the telephone line cord.
All manuals and user guides at all-guides.com
Connections
17