z1 This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby

speaker.

z2 The default sound mode for the AirPlay playback is "Direct".

z3 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.

z4 This item can be selected if the Auro-3D signal contains Dolby TrueHD.

z5 This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.

z6 This item can be selected when surround back speakers are used.

z7 This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.

z8 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.

z9 This item cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.

z10 This item cannot be selected if the sampling frequency of the input signal is 32 kHz.

z11 Selectable when "Surround Parameter" - "IMAX" is set to "Auto" or "On" in the menu. (v p. 186)

z12 Selectable when "Surround Parameter" - "IMAX" is set to "On" in the menu and a 48 kHz sampling frequency DTS 5.1 channel signal is being input. (v p. 186)

z13 Selectable when "Surround Parameter" - "IMAX" is set to "Off". (Selectable sound modes vary depending on the type of input signal). (v p. 186)

z14 This item can be selected when the input signal is DTS-HD Master Audio.

z15 This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.

z16 This item can be selected when the input signal is DTS-HD Hi Resolution.

z17 This item can be selected when the input signal is DTS 96/24.

z18 This item can be selected if the Auro-3D signal contains Multi Channel PCM.

z19 This item can be selected when the input signals contain surround back signals.

z20 This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.

324

Front panel

Display

Rear panel