Marantz AV8805 Owner's Manual page 153

Contents Connections
DTS sound mode
Sound mode type
DTS Surround This mode can be selected when playing sources recorded in DTS.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Dscrt6.1 1
z
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
This mode is suitable for playing discs recorded in DTS-ES.
DTS ES Mtrx6.1 1
z
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit's matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24 This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD This mode can be selected when playing sources recorded in DTS-HD.
DTS Express This mode can be selected when playing sources recorded in DTS Express.
DTS:X This mode can be selected when playing back content encoded with DTS:X.
It decodes DTS:X content and its positioning data in real time and outputs audio from the appropriate speakers, creating
natural audio images regardless of the speaker layout. Use height speakers to realize a three-dimensional sound field.
IMAX DTS This mode can be selected when playing sources recorded in DTS Digital Surround. Additionally, this mode is
automatically activated when playing back IMAX Enhanced content featuring a DTS bitstream. (v p. 186)
IMAX DTS:X This mode is automatically activated when playing back IMAX Enhanced content featuring a DTS:X bitstream.
DTS Neural:X This mode uses DTS Neural:X Upmixer to extend various sources to natural and realistic multi channels for playback.
Use height speakers such as front height speakers to realize a three-dimensional sound field.
This mode uses DTS Virtual:X with virtual height and virtual surround processing to realize a three-dimensional sound field
DTS Virtual:X 2 3
z z
when the height speakers are not used.
z1 This can be selected when "Speaker Config." - "Surr. Back" is not set to "None". (v p. 237)
z2 This can be selected when Height, Ceiling and Dolby Atmos Enabled speakers are not being used.
z3 It cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.
Front panel Display
Playback
(v p. 186)
Rear panel
Settings
Description
153
Remote
Tips Appendix
Index