Marantz AV8805 Owner's Manual page 258

Contents Connections
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Channel
Set whether to playback in stereo or monaural.
Stereo
(Default):
Mono:
Front panel Display
Playback
Stereo playback.
Monaural playback.
Rear panel
Settings
o HDMI Audio (ZONE2 only)
Selects the audio signal format for playing an HDMI source in ZONE2.
Through
(Default):
PCM:
o Volume Level
Set the volume output level.
Variable
(Default):
1 – 98
(–79 dB – 18 dB):
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0 dB".
(v p. 191)
258
Remote
Tips Appendix
The HDMI audio signal is passed through
this unit to the device in ZONE2.
The HDMI audio signal input into this unit
is converted to a PCM signal that can be
output from the ZONE2 PRE OUT
connectors.
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Index