Ventilation System - Nolan N70-2 GT Safety And Instructions For Use

N70-2 GT

VENTILATION SYSTEM

The ventilation system of the helmet consists of:
Lower ventilation system
It allows ventilation in the mouth area and conveys the air directly on the visor reducing
fogging.
See Fig.32 for opening and closing operations.
Top Ventilation System
The innovative AIRBOOSTER TECHNOLOGY system channels the air flowing in from
the front air intake, directing it to the top area of the user's head without any dispersion.
See Fig.33 for opening and closing operations.
Rear ventilation system
It allows warm and stale air to flow out ensuring an optimum comfort inside the helmet
(Fig.34).
SETTING UP THE N-COM - NOLAN COMMUNICATION SYSTEM
(Available depending on the product version)
Your helmet is factory-preset to be equipped with the N-Com communication system.
If your helmet is homologated according to ECE/UN Regulation No.22, it has also been
tested and homologated with the N-Com system installed. Installing a system other
than the N-Com affects the helmet's regulatory compliance.
When installing the communication system (see the specific instructions contained in
the N-Com kit), you need to remove the lower back rest and the foam material fillers,
present in the polystyrene cheek pads at the N-Com earphones seats, from the helmet.
The lower back rest and the above mentioned fillers should be removed only when
using the helmet with a compatible N-Com system installed.
28
INSTRUCTIONS FOR USE
N70-2 GT
29
INSTRUCTIONS FOR USE