RCA CC615 User Manual page 51

Playback
Playback Operation and How to Copy Tapes on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Place the VCR/OFF/CAMERA switch
in VCR to turn on the camcorder. The
power indicator will light.
3. Press PLAY/PAUSE.
• If noise bars appear on the screen,
press TRACKING – or +.
Viewing What the Camcorder is Seeing (or Recording)
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
Note: During record pause, you can use the display feature to see the camcorder's displays on
the TV screen. Details are on pages 42-43.
• During playback, use the playback
features on page 45.
4. To copy what the camcorder is playing,
place a blank cassette in the VCR, and
press the VCR's RECORD button.
Note: Make sure the memory-stop feature
is turned off (press COUNTER R/M) or the
camcorder will enter play pause when the
counter reaches M 0:00:00.
5. Press STOP when you are finished.
Caution: The unauthorized recording
of copyrighted material may infringe
the rights of others.
2. Place the VCR/OFF/CAMERA switch
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV's volume down to
prevent a high-pitched squeal caused by
feedback.
3. Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
49