RCA CC615 User Manual page 25

Recording
6
Cassette Warning
• The indicator flashes when the
VCR/OFF/CAMERA switch is set
to CAMERA and the safety tab has
been removed from the cassette.
• The indicator also flashes
when the VCR/OFF/CAMERA
switch is set to CAMERA and there
is no cassette in the camcorder.
7
Time Remaining, Tape Length
and Tape Speed (SP or SLP)
Time Remaining: The approximate
time remaining on the tape in the
camcorder is automatically
displayed. The correct tape length
must be set.
• The time-remaining indicator will
start flashing when the remaining
tape time reaches two minutes.
• Details are on page 28.
Tape Length: The length of the
tape in the camcorder (T20, T30, or
T40) selected with the SP•SLP/
T20•30•40 switch appears here.
• Details are on page 28.
Recording Speed: The recording
speed (SP or SLP) selected with the
SP•SLP/T20•30•40 switch appears
here.
• Details are on pages 16 and 28.
8
Elapsed Time-Counter with
Memory Stop
• The time counter appears during
playback. It is not recorded on the
tape.
• An "M" appears in front of the time
counter when memory-stop is on.
• Details are on page 27.
9
Quick Set
• The indicator for the mode selected
with the QUICK SET dial appears
here.
• The indicator and mode both
appear briefly when the mode is
selected, and then only the
indicator appears.
• Details are on page 29.
10
LENS COVER
When you turn on the camcorder,
this indicator briefly flashes to
remind you to open the lens cover.
11
Manual Focus
• Manual Focus Indicators (
appear when focus is adjusted
manually.
• Manual Focus Lock Indicators
56
( ) appear when manual focus is
locked.
• Low-Contrast Indicators (
flash when the auto-focus system
cannot focus properly.
• Details are on pages 34-35.
12
Lithium Cell ( )
• This indicator appears when the
clock cell has not been installed or
it needs to be replaced.
• Details are on page 40.
(continued on next page)
)
)
23