Exposure Control (Iris); Zooming - RCA CC615 User Manual

Recording

Exposure Control (Iris)

The camcorder automatically adjusts the iris to provide the best picture. Under certain
conditions, you may want to brighten or darken the image manually.
To Manually Control Brightness
1. Make sure the QUICK SET dial is not
set to AUTO.
2. Press MODE until
2
F
in the viewfinder.
3. Press and hold F2 while sliding the
power zoom lever toward T to

Zooming

The motorized zoom lens allows you to zoom in and out for close ups or
wide-angle shots just by sliding the power zoom lever on the camcorder.
Power Zoom Lever
T = Telephoto
W = Wide Angle
QUICK SET Dial
• To move the lens in the telephoto (close-
up) direction, slide the power zoom
lever toward T.
36
brighten the image or toward W to
darken the image.
The exposure indicator bar appears in
EXP. appears
the viewfinder.
4. To return to auto iris mode, press F2
(or place the QUICK SET dial in
AUTO).
• To move the lens in the wide angle
direction, slide the lever toward W.
Zoom speed varies according to how
far you zoom in or out. The zoom
level indicator appears in the
viewfinder.
EXP.
FOCUS
F 1 F 2
+
-
T
W
Zoom Level Indicator
in Viewfinder