Dmx-Protocol; Addressing - EuroLite LED PAR-64 RGBW 48x3W IP65 User Manual

Led outdoor floorspot
Table of Contents

Advertisement

Available languages

Available languages

Note:
It's necessary to insert the XLR termination plug with 120
proper transmission on the DMX data link.
The device has 2 DMX-modes. The Control Board allows you to assign the DMX-Mode.

DMX-Protocol

6 channel mode
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
Channel:
Value:
5
000 – 255
Channel:
Value:
000 – 000
001 – 005
6
006 – 010
011 – 255
4 channel mode
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255

Addressing

Depending on the DMX-mode, each device of the LED PAR-64 RGBW 48 x 3 W occupies 4 or 6 DMX-
channels. The Control Board allows you to assign the DMX starting address, which is defined as the first
channel from which the LED PAR-64 RGBW 48 x 3 W will respond to the controller.
If you set, for example, the address to channel 7, the device will use the channel 7 to 12 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED PAR-64 RGBW
48 x 3 W correctly and independently from any other fixture on the DMX-chain.
If several LED PAR-64 RGBW 48 x 3 W are addressed similarly, they will work synchronically.
Note:
The modes of DMX 512 data are shown via the DMX indicator.
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received, the control LED is blinking. If there is no data received at the DMX-input, the control lights up
permanently.
This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
OFF
ON
Strobe (increasing)
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
22/24
in the last lighting in the link in order to ensure
00056640.DOC, Version 1.3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sls-400

Table of Contents