System Functions - Samsung WD21T6500 Series User Manual

System functions

Using System Functions
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial and select the desired system function, and then tap
3. Tap to change the selected function's settings or start the function.
NOTE
To return to the main screen, tap
Detergent
You can change the concentration level of the detergent.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Detergent, and then tap
3. Tap to select the desired setting.
- The default setting is 1x.
- You can select from 1x., 2x, or 3x.
NOTE
The dispense amount of detergent decreases as the concentration level increases.
Softener
You can change the concentration level of the softener.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Softener, and then tap
3. Tap to select the desired setting.
- The default setting is 1x.
- You can select from 1x, 2x, or 3x.
NOTE
The dispense amount of softener decreases as the concentration level increases.
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washing
machine remembers the cycles you use most and their settings (Temp., Rinse, Spin) and displays them in
frequency order.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap
3. Tap to select On or Off.
- The default setting is On. Set it to Off if you do not want to use this function.
- When you turn off the function, all the saved data resets.
Untitled-1 41
again or turn the Navigation dial to select Back and tap
.
.
.
.
.
English 41
2022-10-13 11:03:34