NiteRider PRO 2200 RACE User Manual

Fuel Gauge
The 8-step, LED fuel gauge is located
on top of the headlamp in front of the
power button. When all four LED's
are lit solid green, the battery is fully
charged. As the battery discharges
⅛ increments of capacity, the LED's from right to left,
successively go from solid green to blinking green, to out.
With only the final ⅛ capacity remaining one LED blinks red.
At this time, the headlamp should be turned off and the
battery recharged.
BATTERY CHARGING AND CARE
1. Plug the AC Adapter into an electric outlet, then plug
the cable from the AC Adapter into the battery.
2. The LED indicator on the battery will turn red while the
battery is charging. When the battery is fully charged,
the LED will turn blue.
3. Unplug the AC Adapter from the battery by grasping
the connectors rather than the cable.
4. Leaving the battery and AC Adapter connected
indefinitely will not harm the battery or AC adapter.
5. When storing for an extended period of time,
charge the battery every three months to maximize
it's lifespan.
RIDING AT NIGHT
While a Pro 2200 Race lighting system will improve
your view, control and enjoyment of night riding,
please remember that cycling at night is an inherently
dangerous activity. In addition to using your lighting
system properly and riding with extreme caution,
NiteRider urges you to:
• Never ride alone
• Always let someone know where you are going
• Wear a helmet and reflective clothing
• Carry an auxiliary light and emergency supplies
• Make sure the headlamp, mounting bracket and
battery are securely fastened
• Always disconnect the battery from the
headlamp when transporting the light system
PROTECTING YOUR INVESTMENT
Properly charge your battery to maximize its lifespan (see the
"Battery Charging and Care" section for detailed information).
The Pro 2200 Race will perform in wet weather conditions,
but submerging it in water will damage the system.
SUPPORT
If you experience difficulties during product installation or
operation, NiteRider provides free telephone support on
weekdays from 8:00 AM to 4:30 PM (Pacific Time)
at 800.466.8366, ext 4. You may also e-mail us at
support@niterider.com.
WARRANTY
NiteRider stands behind its products with the following
warranties:
• Lifetime warranty on all mechanical components
• 2 years on electrical components
• 1 year on rechargeable batteries
To obtain warranty service, it is preferable to have your
original sales receipt. Contact the NiteRider customer
service department at 800.466.8366, ext 4 to obtain a
Return Merchandise Authorization (RMA) number. The
RMA number must be prominently displayed on the outside
of your package. The product must be properly packaged
to prevent damage in transit.
For complete warranty information, please visit our
website at www.niterider.com.
RUN TIMES
The Pro 2200 Race will run up to:
Light Level Run Times*
High 1:15
Medium 2:30
Low 5:00
Race** 12:00
Walk 34:00
*Run Times are approximations and will vary.
**Race mode is intended for endurance races.
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, CA 92123
www.niterider.com
Lumens
2200
1200
600
250
Pro 2200 Race
80
150-23274
User Guide