Table of Contents
Advertisement
en Appliance door
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Open the appliance door slightly.
2.
Push on the left- and right-hand side of the door
cover from the outside
3.
Remove the door cover .
4.
Clean the door cover.
→ "Suitable cleaning agents", Page 17
5.
Undo and remove the left- and right-hand screws on
the appliance door
6.
Place a folded-up tea towel in the appliance door.
Pull the front pane up and out
7.
Set the front pane down on a level surface with the
door handle facing down.
8.
Press the intermediate pane against the appliance
with one hand while pushing the left- and right-hand
retainers
upwards. Do not detach the retainers
9.
Remove the intermediate pane.
22
until it is released.
.
.
10.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
11.
Clean the appliance door.
→ "Suitable cleaning agents", Page 17
12.
Dry the door panes and refit them.
19.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Turn the intermediate pane until the arrow
the top right.
2.
Insert the intermediate pane into the retainer
the bottom
3.
Push the left- and right-hand retainer
until the intermediate pane is clamped .
.
4.
Attach the front pane downwards into the left- and
right-hand retainers
and push it in firmly at the top.
.
is in
at
downwards
Advertisement
Table of Contents
