Table of Contents
Advertisement
12 Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
12.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
12.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food.
Information on the settings
Once you start a dish, the display shows relevant
information for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
12.3 Overview of the dishes
You can see which individual dishes are available to
you here.
Dishes
¡ Chicken, unstuffed
¡ Turkey breast
¡ Roasting joint
¡ Belly
¡ Slow roasting joint
¡ Top rump
¡ Boned leg of lamb, medium
¡ Meat loaf made from fresh mince
¡ Goulash
¡ Stew with vegetables
12.4 Adjusting the dish
Note: Once it has started, you can no longer change or
interrupt the dish or the settings.
Requirement: To start the operation, the cooking com-
partment must be cooled down.
1.
Press
.
2.
In the operating modes menu, use the rotary se-
lector to select "Dishes".
3.
Press .
a The first dish is suggested.
4.
Use the rotary selector to set the required dish.
5.
Press .
6.
Use the rotary selector to set the weight of the food.
The cooking time is calculated automatically.
7.
Press .
8.
Information is shown for the dish.
After a few seconds, the appliance returns to the set
dish.
9.
Information is shown for the dish.
For some dishes, you can also delay the end
‒
time.
→ "Setting the end time", Page 13
10.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down. The heating line does not appear.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
11.
Once the cooking time has elapsed:
Press
to silence the audible signal manu-
‒
ally.
For some dishes, you can extend the cooking
‒
time if necessary.
→ "Adding extra cooking time", Page 15
When the dish is ready, press
‒
appliance off.
Adding extra cooking time
For some dishes, the appliance allows you to extend
the cooking time once the set cooking time has
elapsed. You can do this as often as required.
1.
If you do not want to extend the cooking time, press
and then press to switch the appliance off.
2.
To extend the cooking time, press .
a A cooking time appears on the display.
3.
If necessary, use the rotary selector to change the
cooking time.
4.
Press
to start the operation.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The appliance stops heating. The noti-
fication for extending the cooking time appears
again.
5.
Once the cooking time has elapsed:
Press
to silence the audible signal manu-
‒
ally.
If you want to extend the cooking time again,
‒
press .
When the dish is ready, press
‒
switch the appliance off.
Dishes en
to switch the
and use
to
15
Advertisement
Table of Contents
