Wool
•
Always check any care instructions that may be on the clothes before washing.
•
When the wash is completed, remove the clothes for airing immediately to avoid
deformation.
•
The temperature cannot be set higher than 40 degrees to avoid damage to
clothing.
•
Using wool detergent can improve washing performance.
•
Always wash light colour clothes and dark colour clothes separately.
Backpack
•
This cycle is only intended for washing backpacks which can be washed by
washing machine.
•
Remove any attached decoration (such as badges or pins) before washing and
bind the straps and any belts tightly.
•
Ensure all zippers are closed and that the backpack is being washed separately
from other clothes.
•
When the wash is completed, remove the backpack for airing immediately.
Delay wash
Once a suitable program has been set, press the delay button to set the finish time of the
cycle. Press the Start/Pause button to start the delay wash function. The delay time can be
set in one-hour increments to a maximum of 24 hours.
•
If the delay time needs to be amended or cancelled after the program has started,
turn off the power and set again.
•
When confirming the delay time, press the delay button. The set delay time will
display for 5 seconds.
•
The delay time will differ depending on the water pressure, drainage, clothes type
and water temperature.
Add
Use this function to add washing to the machine after a program has commenced. Press the
"Start/Pause" button until the time disappears. The door lock will release, and the display
will show "Add". Add washing as required then close the door and press the "Start/Pause"
button to continue to wash.
•
Do not attempt to forcibly open the door, as this can easily damage internal parts
and cause safety issues.
•
When there is a lot of foam or water in the drum, use a dry towel to prevent foam
and water from spilling out when the door is opened.