3.
Place both hands on top of the washer diagonally, then press down and shake the
washer slightly to make sure that the washer is steady.
Connecting the water inlet hose to the tap
1.
Check that the sealing washer is firmly seated.
2.
Attach the curved end of the hose to the inlet valve of the washing machine.
Tighten the coupling nuts securely by hand.
3.
Attach the straight end of the hose to the tap. Tighten the coupling nuts securely
by hand.
4.
Turn on the taps and check for leaks. Tighten the coupling nuts firmly if there is any
leakage. If the water pressure is strong, close the water tap completely then open it
slightly.
Tap
Sealing washer
Tap end
Inlet hose
Tighten