Positive Engagement Tape Leader Buckling Mechanism; Modular Design - Quantum SDLT 600A Product Manual

Positive Engagement Tape
Leader Buckling
Mechanism

Modular Design

SDLT 600A Product Manual
data. The back side of the AMP media receives a specially formulated
coating to accept the optical servo tracks. Because the servo information is
on the back side of the media, the entire data-bearing side of the media is
available for recording data and eliminates the need for pre-formatting.
In addition, AMP media meets the needs of multiple generations of the
SDLT technology.
The positive engagement tape leader buckling mechanism is a highly
robust mechanism that increases data cartridge life and supports the
extensive duty-cycle environments found in high-end and automation
1
environments.
This mechanism engages the tape leader upon data cartridge load and
disengages it upon data cartridge unload. It uses a solid metal pin
attached to the drive leader to link with molded clips permanently
attached to the tape leader inside the data cartridge. The Positive Leader
Link design makes the buckling of Super DLTtape media a totally reliable
mechanical process.
The SDLT 600A tape drive is designed as a total system. The system
includes a complex interaction of a number of important components
including such items as the tape path, tape heads, media, data cartridge,
and host interface.
As shown in figure
modules:
• Data Control Module (DCM)
• Tape Control Module (TCM)
• Front Panel Module (FPM)
• Electronic Interface Module (EIM)
• Super DLTtape II Data Cartridge (Data Cartridge).
The modular concept makes the SDLT 600A tape drive easy to
manufacture and configure. Each module is optimized to perform a
Appendix A SDLT 600A Tape Drive Specifications
76, the SDLT 600A tape drive consists of five distinct
Modular Design
1
100