Using Other Settings For Wireless Flash Recording - Panasonic Lumix DMC-FZ2000 Operating Instructions Manual

6. Stabiliser, Zoom and Flash
3
Press 3/4 to select an item and then press [MENU/SET].
• Press [DISP.] to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]:
[Built-in
[OFF]:
Flash]/
[Flash Adjust.]
[External
Set the flash output of the camera manually when [Firing Mode] is set to [TTL].
Flash]
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[Firing Mode]
[TTL]:
[AUTO]:
[MANUAL]:
[OFF]:
[A Group]/
[Flash Adjust.]
[B Group]/
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[C Group]
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
¢This option is not displayed when the flash (DMW-FL200L: optional) is attached to the camera.

Using other settings for wireless flash recording

Setting the output of communication light
Select the menu. (P51)
> [Rec] > [Flash] > [Communication Light]
MENU
Settings: [HIGH]/[STANDARD]/[LOW]
The camera automatically sets the output.
¢ : Flash output is set by the external flash.
Set the luminosity ratio of the external flash manually.
The flash on the camera side emits only communication light.
The camera automatically sets the output.
The wireless flashes automatically set the output.
Set the luminosity ratio of the wireless flashes manually.
The wireless flashes of the specified group will not fire.
156