Table of Contents
Advertisement
5. 4K Photo and Drive Settings
• Operations during recording standby (The camera is turned on)
Button
operation
[Fn5]
• After the recording stops, a confirmation screen will be displayed, asking whether to
proceed to create a motion picture.
To create a motion picture, select [Yes].
For information on creating motion pictures, refer to P138.
Changing the Time Lapse Shot settings
∫
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
• This function is not for use in a security camera.
• [Time Lapse Shot] is paused in the following cases.
– When the charge on the battery runs out
– Turning the camera off
During [Time Lapse Shot], you can replace the battery and the card, and then restart
by turning on this unit. (Note that pictures taken after the restart will be saved as a
separate set of group pictures) Turn off this unit when replacing the battery or the card.
• When [Shooting Interval] is set to a longer value, if the camera turns off automatically while
waiting for the next recording, we recommend that you use Time Lapse Shot in Auto Focus
Mode.
Not available in these cases:
• This function is not available in the following cases:
– [Handheld Night Shot] (Scene Guide Mode)
– When using [Multi Exp.]
Touch
operation
Displays a selection screen that lets you pause or stop
the recording
Displays a selection screen that lets you resume or
stop the recording (during pause)
135
Description of operation
Advertisement
Table of Contents
