Table of Contents
Advertisement
4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 2–3 to use the Intel
Technology.
P9D-C/4L
P9D-C Series RAID setting
5.
Platform Enviromental Control Interface Setting (3-pin PECI1)
When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor information
of the Platform Environmental Control Interface (PECI). Set to pins 1-2 if ASMB7-iKVM
is not installed.
2-28
®
RAID_SEL1
1 2
2 3
3ͬͩ Party
Intel
(Default)
Chapter 2: Hardware information
Rapid Storage
®
Advertisement
Table of Contents
