4. Install the
SD
card.
5. Follow the procedure in
Speakers
Removing the left speaker
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
SD
card.
3. Remove the
SIM card
4. Remove the
base
cover.
5. Remove the
WWAN
card.
6. Remove the battery.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Steps
1. Remove the single (M1.6x1.8) screw securing the Proximity sensor bracket to the plam-rest assembly.
2. Disconnect the Proximity sensor cable for the left speaker's WWAN antenna module from the RF board.
3. Disconnect the left speaker cable from connector on the system board, and unroute the speaker cable from the routing
guides.
4. Remove the single (M1.6x1.8) screw that secure the left speaker, and lift the left speaker off the system.
After working inside your
Before working inside your
tray.
computer.
computer.
Before working inside your
Removing and installing components
43