About this task
The following image indicates the location of the I/O daughter board and provides a visual representation of the installation
procedure.
Steps
1. Connect the I/O daughter board FPC cable to the I/O daughter board.
2. Place the I/O daughter board with the FPC cable in the slot on the system.
3. Align and place the I/O board bracket on the I/O daughter board.
4. Replace the single (M2x4) screw securing the I/O daughter board bracket to the palm-rest assembly.
5. Connect the I/O daughter FPC cable to the connector on the system board.
Next steps
1. Install the
display
assembly.
Removing and installing components
51