Draper 70429 Manual

Pedestal fans

Table of Contents

Download this manual



ORIGINAL LANGUAGE

PEDESTAL

FANS

70429, 70430.

Stock No. 70429 shown

These instructions accompanying the product are the original instructions. This document is part of the product,

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions

before assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,

and contains all the necessary information to ensure its correct and safe use. By following all the general safety

instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the

product itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper

Tools policy of continuous improvement determines the right to make modifications without prior warning.

Table of Contents

Need help?

Do you have a question about the 70429 and is the answer not in the manual?

Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Page 2 WEEE – injury. Waste Electrical & Electronic Equipment. Draper Tools Ltd, recommends that this fan not be Do not dispose of Waste Electrical & Electronic modified or used for any application other than that for Equipment in with domestic rubbish.
Page 3 Fig A. If any part is damaged • Do not use the fan near an open window, as rain can or missing, please contact the Draper Help Line (see create an electrical hazard. back page). Do not attempt to use the product! •...
Page 4 IDENTIFICATION – FIG.A Stock No. 70429 shown Guard (1) Blade (2) Motor (3) Switch (4) (10) Guard Clip (5) (11) Power Supply Cord (6) Guard Handle (7) “T” JOINT (8) Inner Pole (9) (10) Height adjustment (13) (11) Outer Pole...
Page 5 WARRANTY 9.1 WARRANTY Draper tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship. Should the tool develop a fault, please return the FIG.
Page 6 ....................authorised....................Your Draper warranty is not effective unless you can ....................produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

70430