Draper FAN16 User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Fan
  5. FAN16
  6. User manual

Draper FAN16 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
16" DESK
FAN
09111
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FAN16 and is the answer not in the manual?

Questions and answers

Related Manuals for Draper FAN16

Summary of Contents for Draper FAN16

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Introduction

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE ....................2 2. CONTENTS 2.1 CONTENTS ........................3 3. GUARANTEE 3.1 GUARANTEE ....................... 4 INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................5 4.3 HANDLING &...

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

  • Page 5: Introduction

    The 16", 3 speed oscillating desk fan described in this booklet is intended for air flow circulation uses in home or office environments. 4.2 SPECIFICATION Stock No............................09111 Part No........................... FAN16 Motor: Rated voltage ........................230V Rated frequency........................50Hz Rated input ..........................45W No.

  • Page 6: Health And Safety Information

    HEALTH AND SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE When using any type of power tool there are steps that should be taken to make sure that you, as the user, remain safe. Common sense and a respect for the tool will help reduce the risk of injury. Read the instruction manual fully.

  • Page 7: Additional Safety Instructions For Fans

    Warning: Please read the following instructions carefully, failure to do so could lead to serious personal injury. Draper Tools Ltd., recommends that this fan not be modified or used for any application other than that for which is was designed. If you are unsure of its relative applications, do not hesitate to contact us in writing and we will advise you.

  • Page 8: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Base. Clips. Front grille. Speed control collar. Fan blade. Rear grille. - 8 -...

  • Page 9: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the machine.

  • Page 10: Assembling The Fan

    ASSEMBLING THE FAN 8.1 ASSEMBLING THE BASE Align the fan body with the base of the fan ensuring the groove and nut are aligned. To secure, using the threaded nut on the fan body, tighten the assembled parts together. 8.2 ASSEMBLING THE PROTECTIVE BLADE GRILLES Remove plastic clamp nut from motor.

  • Page 11: Fan Instruction

    FAN INSTRUCTION 9.1 SWITCH OPERATION The speed is controlled by rotating the collar on the fan: OFF. LOW. MEDIUM. HIGH. Important: Remove the plug from the power supply and wait until the fan has completely stopped rotating before making any adjustments to it.

  • Page 12: Explanation Of Symbols

    10. EXPLANATION OF SYMBOLS 10.1 EXPLANATION OF SYMBOLS Do not dispose of WEEE* unsorted municipal waste. Class II construction (Double insulated). - 12 -...

  • Page 13: Disposal

    12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •...
  • Page 14 NOTES - 14 -...
  • Page 15 NOTES - 15 -...
  • Page 16 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Table of Contents