Amart Furniture WINTON 72058 Assembly Instruction

Bedside

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts, please phone

Amart Furniture, Customer Service Free call 1800 351 084

ASSEMBLY INSTRUCTION

WINTON BEDSIDE

ITEM CODE 72058

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts, please phone

Amart Furniture, Customer Service Free call 1800 351 084

ITEM CODE 72058

Table of Contents

Need help?

Do you have a question about the WINTON 72058 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION WINTON BEDSIDE ITEM CODE 72058 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts, please phone Amart Furniture, Customer Service Free call 1800 351 084 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Take care when lifting. Product should be assembled as near as possible to the point of use. 3. Ensure that you have all the required contents for complete assembly. 4.
Page 3 ITEMS REQUIRED A. Tipping Kits Long Screw 2pcs Short Screw 2pcs Mounting Plate 2pcs Wall Strap 1pc Note: Tipping Kits are attached on the back panel. 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry, you will need to acquire wall anchors.
Page 4 ASSEMBLY IS COMPLETE WALL ITEM CODE 72058...
Page 5 CARE AND MAINTENANCE A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of this, there will be natural variations in surface texture and grain like knots, mineral streaks and sap runs that may affect the finish. These differences in character are not defects, but distinctions that make each piece of furniture unique.