Dell PowerVault MD2412 Owner's Manual page 28

Figure 25. Removing the EMM
2. Rotate the handle to release the EMM from the chassis.
3. Hold the handle and guide the EMM out of the chassis.
Installing the EMM
Steps
1. Rotate the release latch on the EMM 45°.
Figure 26. Installing the EMM
2. Hold the latch and guide the EMM into the chassis.
3. Rotate the latch, securing the EMM into the chassis.
4. Connect the SAS cables to the SAS ports on the EMM.
5. Ensure that the EMM status indicator turns on solid green, and use your system manager software to verify that the EMM is
operating properly.
28 Replacing components