Figure 14 Port Naa Identifier - Data Format; Table 24 Port Naa Identifier - Field Descriptions - Quantum DLT S4 Reference Manual

Figure 14 Port NAA Identifier
— Data Format
Bit
7
Byte
0
PIV (1)
1
2
3
(MSB)
4 — 11
Table 24 Port NAA Identifier —
Field Descriptions
Field
Protocol Identifier
Code Set
PIV
Association
Identifier Type
Identifier Length
NAA Identifier
DLT-S4 Interface Reference Guide
Port NAA Identifier
Figure 14 shows the format of the
6 5
Protocol Identifier
Reserved Association (1)
Description
The drive returns 0 if the protocol is Fibre Channel, and 6h if the protocol is SAS.
This identifier type is not returned by devices using a parallel SCSI interface.
Set to 1h, indicating binary data.
Set to 1, indicating that the value returned in the Protocol Identifier field is valid.
Set to 1h, indicating that the Identifier is associated with the port.
Set to 3h indicating this identifier is of the NAA type.
Specifies the length in bytes of the Identifier field. If the Allocation Length field of
the CDB is too small to transfer the entire identifier, the Identifier Length value is
not adjusted to reflect the truncation.
Contains the Name Address Authority (NAA) identifier for the port.
Port NAA Identifier.
4 3
Reserved
Identifier Length (08h)
NAA Identifier (binary)
Chapter 4 SCSI Commands
INQUIRY Command (12h)
2 1
Code Set (1)
Identifier Type (3)
4
0
(LSB)
47