Playing Back/Deleting The Photos/ Videos - Bushnell TROPHY CAM HD VITAL 119726C Instruction Manual

Before leaving the camera unattended, please check for the following:
• Are the batteries or DC power supply inserted/connected with correct
polarity and is the power level is sufficient?
• Does the SD card have sufficient available space and is its write-protection
(lock) switch off?
• Is the Power switch in the ON position? (do not leave it in SETUP).
PLAYING BACK/DELETING THE PHOTOS/
VIDEOS
After you have setup, mounted and activated your Trophy Cam HD Vital, you
will of course be eager to return later and review the images it has captured for
you. There are several different ways this can be done.
Reviewing Images Directly From the SD Card
This is the most popular method of viewing images. Since unmounting the camera
and taking it to your computer isn't very convenient, you may find it easier to just
take the card out. By removing the SD card (swapping it for a new empty card if
you like) and taking it to your home or campsite to view the images by using an
SD card "reader" (user supplied) connected to your computer (some computers
and TVs have a built in SD card slot), you can leave the camera in place ready to
capture more images. Once connected, the card reader works the same way as
described below-please read that section if you have any problem finding your
files.
Reviewing Images on an External Video Monitor
A TV monitor can also be used to play back pictures
(or videos) from the device. Connect a TV monitor or a
viewing device (such as a digital picture frame) that has a
standard composite video input (RCA jack) to the Trophy
Cam HD Vital's "TV Out" mini jack using a suitable cable
(not included). Then:
• Put the power switch in SETUP mode (switch to
OFF first).
• Press the OK key. The most recently captured
image will be shown on the video monitor. For video
Cable from "TV Out"
23