2U Rackmount Component Replacement Guide
6 Connect the tape drive power cable assembly to the rear panel of the
tape drive.
7 Replace the 2U Rackmount cover (see
page 5).
8 Slide the unit back into the equipment rack and secure it to the rack
(see
Sliding the 2U Rackmount Into the Equipment Rack
9 Connect the unit power cable at the rear panel (see
on page 3).
10 Turn on power to the unit by pressing and holding the power button
on the front panel for one second.
11 Turn on any peripheral devices you turned off earlier.
12 Turn on the host computer.
Chapter 3 Fans
Installing a Fan Module
Replacing the Cover
on page 4).
Connecting Power
on
30