Advertisement
Quantum ATL M2500 Unpacking Instructions
Document 6423000-04 A01
May 2003
Figure 14 Removing the
Foam Pad from the X-Y
Platform Lift Cable
14
Remove all remaining magazines by grasping the handle at the
6
front of each magazine and sliding it forward and out of the
library.
When reaching into the library through the magazine
Caution:
access doors, be careful not to exert pressure on the
magazine shelves. Excessive pressure may bend the
shelves.
Remove the pad from the X-Y platform lift cable (see
7
With your right hand, reach into the library through the empty
a
level 2 right magazine slot and gently pull the X-Y platform lift
cable towards you.
With your left hand, reach into the library through the empty
b
level 2 left magazine slot, remove the foam pad from the cable,
and pull it out of the library.
Release the X-Y platform lift cable.
c
(Magazines and drives
omitted for clarity)
Removing the Remaining Packing Materials
figure
X-Y platform lift cable
14):
Advertisement
