Subscribe to Our Youtube Channel
Related Manuals for SHOWTEC Performer Profile 600 LED MKII V1
Summary of Contents for SHOWTEC Performer Profile 600 LED MKII V1
- Page 1 MANUAL ENGLISH Performer Profile 600 LED MKII V1 Ordercode: 33062 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Performer Profile 600 LED MKII Table of contents Warning ....................................3 Safety Instructions ................................. 3 Operating Determinations ............................5 Rigging .................................... 5 Connection with the mains............................6 Return Procedure ................................7 Claims ....................................7 Description of the device ..............................8 Overview .................................. - Page 3 Performer Profile 600 LED MKII Maintenance ..................................25 Replacing the Fuse ..............................25 Troubleshooting ................................25 No Light ..................................25 No Response to DMX..............................26 Product Specifications ..............................27 Dimensions ..................................28 Notes ....................................29 Ordercode: 33062...
-
Page 4: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Performer Profile 600 LED MKII • PowerCON power cable (1,5 m) •... - Page 5 • If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 6: Operating Determinations
Performer Profile 600 LED MKII • The user is responsible for correct positioning and operating of the Performer. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. • This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. -
Page 7: Connection With The Mains
Performer Profile 600 LED MKII Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK... -
Page 8: Return Procedure
Performer Profile 600 LED MKII Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture. -
Page 9: Description Of The Device
Performer Profile 600 LED MKII Description of the device Features The Showtec Performer Profile 600 LED MKII is a theater spotlight fixture with high output and great effects. • Input coltage: 100-240V AC, 60/50Hz • Power consumption: 220W • Light source: 19 x 10W LED •... - Page 10 Performer Profile 600 LED MKII Fig. 02 01) Lens tube 02) Beam focus control 03) Barrel 04) Mounting bracket 05) LED lens 06) LED board 07) Thermal switch holder + thermal switch 08) Driver board 09) Insulated handle 10) PCB 11) Fuse T3,15AL/250V 12) PS socket 13) PS socket...
-
Page 11: Backside
Performer Profile 600 LED MKII Backside Fig. 03 20) Fuse T3,15AL/250V 21) PowerCON power connector 100-240V IN 22) PowerCON power connector 100-240V OUT 23) 5-pin DMX signal connector IN 24) 5-pin DMX signal connector OUT 25) 3-pin DMX signal connector IN 26) 3-pin DMX signal connector OUT 27) LED display + control buttons Ordercode: 33062... -
Page 12: Installation
Performer Profile 600 LED MKII Installation Remove all packing materials from the Performer Profile 600 LED MKII. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. -
Page 13: Color Frame Retaining Clip
Performer Profile 600 LED MKII Color Frame Retaining Clip The color frame holder is equipped with a spring-loaded retaining clip. This prevents color frames and accessories from falling out (Fig. 06). Make sure that all color frame accessories are locked in position with the retaining clip before hanging the Performer Profile 600 LED MKII. -
Page 14: Shutters
Performer Profile 600 LED MKII Shutters The shutters are located inside the barrel. Move them back and forth to modify the shape of the beam. Fig. 07 Drop-in Iris Slot The Drop-in Iris slot is located on the top of the barrel. It accommodates either a drop-in iris or a motorized pattern device. -
Page 15: Rotating The Barrel Assembly
Performer Profile 600 LED MKII Rotating the Barrel Assembly 01) Loosen the barrel rotation control. It can be found directly behind the shutters on the underside of the reflector housing (Fig. 09). Do not remove the barrel rotation control. 02) Rotate the barrel to the desired position. 03) Once the barrel is positioned, tighten the barrel’s rotation control to lock it into position. -
Page 16: Control Modes
Performer Profile 600 LED MKII Control Modes There are 3 modes: • Stand-alone (Run) • Master/Slave • DMX-512 (1CH, 2CH, 3CH) One Performer (Run Mode) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Plug the end of the electric mains power cord into a proper electric power supply socket. -
Page 17: Multiple Performers (Dmx Control)
Performer Profile 600 LED MKII Multiple Performers (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin/5-pin XLR cable to connect the Performers and other devices. 04) Link the units as shown in fig. -
Page 18: Fixture Linking
Performer Profile 600 LED MKII Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 19: Control Panel
Performer Profile 600 LED MKII The Performer Profile 600 LED MKII can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel A) LCD Display MENU button C) ENTER button D) UP button DOWN button Fig. -
Page 20: Menu Overview
Performer Profile 600 LED MKII Menu Overview Ordercode: 33062... -
Page 21: Main Menu Options
Performer Profile 600 LED MKII Main Menu Options Dimmer Settings DMX-512 Mode Run Mode 1. Dimmer In this menu you can manually adjust the dimmer intensity. 01) While in the main menu, press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. -
Page 22: Dmx Data Transfer
Performer Profile 600 LED MKII 04) When the option is inactive, the Settings menu will not get locked, providing that the device remains in it. 05) If the display shows and turns off after 30 seconds – you will need to re-insert the safety key, anyway. -
Page 23: Settings Menu Safety Lock
Performer Profile 600 LED MKII 2.6. Settings menu safety lock In this menu you can activate the settings menu lock. , press the ENTER button to open the menu. 01) When the display shows 02) Press the UP/DOWN buttons to toggle between to deactivate/activate the menu lock. -
Page 24: Dmx-512 Mode
Performer Profile 600 LED MKII 3. DMX-512 Mode In this mode you can set the DMX address. 01) While in the main menu, press the UP/DOWN buttons until the display shows 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to set the desired DMX address. -
Page 25: Cleaning
Performer Profile 600 LED MKII Cleaning Please follow the next recommendations when cleaning and inspecting lenses and reflectors: Do not use glass or window type cleaners on lenses (glass or polymer) or reflectors. Do not use abrasive materials such as steel wool. Replace lenses if they contain visible damage (cracks or deep scratches) which that may impair their effectiveness. -
Page 26: Maintenance
Response: Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Performer to your Showtec dealer. 03) The fuse. Replace the fuse. See page 25 for replacing the fuse. -
Page 27: No Response To Dmx
Performer Profile 600 LED MKII No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 01) Check the DMX setting. Make sure that DMX addresses are correct. 02) Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again. -
Page 28: Product Specifications
Performer Profile 600 LED MKII Product Specifications Model: Showtec Performer Profile 600 LED MKII Input voltage: 100-240 V AC, 60/50Hz Power consumption: 220W (full output) DMX linking: 30pcs Fuse: T3,15AL/250V Dimensions: 490 x 305 x 462 mm (LxWxH) Weight: 7,5 kg... -
Page 29: Dimensions
Performer Profile 600 LED MKII Dimensions Ordercode: 33062... -
Page 30: Notes
Performer Profile 600 LED MKII Notes Ordercode: 33062... - Page 31 Performer Profile 600 LED MKII Ordercode: 33062...
- Page 32 ©2016 Showtec...
Need help?
Do you have a question about the Performer Profile 600 LED MKII V1 and is the answer not in the manual?
Questions and answers