Amart Furniture SUMMIT 51814 Assembly Instruction

Dining chair

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts please phone Amart

Furniture Ewing Road, Customer Service Free call 1800 351 084

ASSEMBLY INSTRUCTION

SUMMIT DINING CHAIR

ITEM CODE

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.

For any assistance with assembly or for missing parts please phone Amart

Furniture Ewing Road, Customer Service Free call 1800 351 084

PAGE 1 OF 4

51814

450MM

955MM

600MM

51814

Table of Contents

Need help?

Do you have a question about the SUMMIT 51814 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION SUMMIT DINING CHAIR ITEM CODE 51814 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture Ewing Road, Customer Service Free call 1800 351 084 450MM...
Page 2 PRE-ASSEMBLY PREPARATION BEFORE YOU START… 1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY DAMAGE THE PRODUCT. 2. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE ASSEMBLY. 3. ALWAYS READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY. 4.
Page 3 HARDWARE LIST STEP 2 ATTACH THE SEAT FRAME TO BACK LEG WITH E, D, A STEP 1 ALIGN BOTH OF THE BACK RAILS AND ATTACH SEAT FRAME TO THE BACKREAST WITH E, D, B AS SHOWN IN THE DIAGRAM STEP 3 STEP 4 CAUTION ATTACH THE FRONT...
Page 4 IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR LEGS ARE ALIGNED AND LEVEL. THEN TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR USE. COMPLETED ASSEMBLY 51814 PAGE 4 OF 4...