Next steps
1. Reconnect the peripherals and connect the system to the electrical outlet.
2. Turn on the system, including any attached peripherals.
Optical drive
Removing optical drive
Prerequisites
1. If installed, remove the front bezel.
2. Remove the system cover.
Steps
1. Disconnect the optical drive cable from the optical drive.
2. Press the blue latch and slide the optical drive from the system.
Next steps
Install the optical drive.
Installing optical drive
Steps
1. Slide the optical drive to the system, until the locks into place.
2. Connect the optical drive cable on the optical drive.
3. Install system cover and front bezel if applicable.
Disassembly and reassembly
37