Table of Contents
Advertisement
Use DP and HDMI as input then use USB
B/USB C as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your duel devices to the "USB
C" and "USB up" port of this monitor
at the same time.
PC1: USB UP as upstream and HDMI
or DP cable for both video and audio
transfer.
PC2: USB C as upstream (USB C-A) and
DP or HDMI for both video and audio
transfer.
Source
HDMI or DP
DP or HDMI
2. Connect peripherals to the USB
downstream port of this monitor.
1
USB UP
PC1
3. Enter to OSD menu. Go to KVM
layer and select "Auto", "USB C"
or "USB up" to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.
USB Upstream
USB UP
USB C
PC1/PC2
USB C
PC2
2
USB USB
Note
1. You can also adopt "MultiClient
Integrated KVM" in PBP mode, when
you enable PBP, you can see two
different sources projected to this
monitor side by side simultaneously.
"MultiClient Integrated KVM"
enhances your operation by using
one set of peripherals to control
between in two systems through the
OSD menu setting. Follow step3 as
mentioned above.
2. In PBP mode, when the main screen
is a USB C signal, KVM will identify
USB C as an uplink signal.
1
12
Advertisement
Table of Contents
