Tripp Lite B127U-111-PDPD Owner's Manual page 6

Installation
Application Diagram
Displayport Transmitter
USB Power
Adapter
USB Power
Adapter
4K/60Hz Source
HDMI 2.0 Cable
up to 230
24AWG Cat6 Cable
4K/60 Hz Only
HDMI Local Port
1. Make sure all equipment in the installation – such as TVs,
Blu-ray players and the transmitter – is powered off.
2. Connect the pigtail DisplayPort connector on the transmitter
unit to the DisplayPort input on the source.
Optional: Using an HDMI 2.0 cable (such as Tripp Lite's
P569-XXX-CERT or P568-XXX-2A Series cables), connect a
display to the LOCAL port on the transmitter unit.
3. Using 24 AWG solid wire Cat6 cable, connect the RJ45 port
on the local transmitter unit to the RJ45 input port on the
remote receiver unit.
4. Connect the pigtail DisplayPort connector on the remote
receiver unit to the DisplayPort port on the display.
5. Connect the pigtail USB-A connector on the local
transmitter unit to a USB 3.0 port or a USB power adapter
(5V/1A) and into a wall power outlet. The LED next to the
RJ45 port will illuminate solid green to indicate the unit is
receiving power.
Displayport Transceiver Displayport Transceiver
USB Power
Adapter
4K or 1080p
4K or 1080p
TV
TV
up to 230
24AWG Cat6 Cable
6
Displayport Transceiver
USB Power USB Power
Adapter Adapter
4K or 1080p
TV
up to 230 up to 230
24AWG Cat6 Cable 24AWG Cat6 Cable
Displayport Transceiver
4K or 1080p
TV