DIN1250 Features: • • protections: power output 5A/12÷15VDC • • wide AC input voltage range 90÷264V SCP short-circuit protection • • high efficiency 87% overvoltage protection • • LED optical signalisation overload protection (OLP) • warranty – 2 year from the production date CONTENTS: 1.
DIN1250 Operation safety (tab.5) Protection class PN-EN 60950-1:2007 second) II ( Protection grade PN-EN 60529: 2002 (U) IP20 Electrical strength of insulation: - between input input and output circuits of the PSU (I/P-O/P) 3000 V/AC min Insulation resistance: - between input circuit and output or protection circuit 100 MΩ, 500V/DC...
DIN1250 6. Check the output voltage PSU. If the value of the voltage requires adjustment, it should be set by the V potentiometer (12 ÷15V DC), monitoring the voltage at the output of the PSU. 7. Once the tests and operation control have been completed, the enclosure/cabinet can be locked.
Page 6
WEEE separately. GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year warranty for the equipment, counted from the device’s production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (the selection is at the manufacturer’s discretion) if the malfunction is due to the manufacturer, includes manufacturing or material defects, unless such...
Need help?
Do you have a question about the DIN 1250 and is the answer not in the manual?
Questions and answers