Disconnecting The Usb-C Power Adapter; Connecting The Multiport Adapter; Usb-A Ports - StarTech.com DKT30CSDHPD3 User Manual

3. The power adapter will power the Multiport Adapter and pass power
through to the Host Computer.
4. Depending on the Host Computer's operating system, the Multiport
Adapter will automatically detect and install the required driver.

Disconnecting the USB-C Power Adapter

Warning
ing a USB-C power adapter from the Multiport Adapter, ensure all data
transfers are complete. If you disconnect the power adapter while transfer-
ring files to or from an attached storage device, the transfer will stop. This
may corrupt any files that you were attempting to transfer.
1. Complete all data transfers.
2. Disconnect the Multiport Adapter's USB-C Connector from the Host
Computer.
3. Disconnect the USB-C Power Adapter from the Multiport Adapter.
4. Disconnect the HDMI device from the HDMI Port.
5. Eject the SD or Micro SD card(s).
6. Disconnect any USB peripherals.

Connecting the Multiport Adapter

USB-A Ports

The USB-A Ports can be used as charging ports (e.g. cell phone, laptop,
tablet, etc.), or to connect a USB storage device (e.g. Flash Drive) or other USB
peripheral device (e.g. Keyboard, Mouse, etc.).
1. Connect a USB-A Cable to a USB-A Port on the Multiport Adapter.
2. Connect the other end of the USB-A cable to a USB-A Port on your USB
device.
Note:
The USB-A Port on the Multiport Adapter can fast-charge devices that
comply with USB Battery Charging Specification Revision 1.2.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
(if the Host only supports Power Delivery 2.0): Before disconnect-
7