Advertisement
Quick Links
_____________________________________________________________________
CAN6-CT6
Low-Power High-Performance Low-Cost 48 Channel SMD GPS
Module :
Features
◆
48 track verification channels
◆
SBAS(WASS or EGNOS)
◆
Tracking sensitivity -163dBm
◆
Active Jammer Remover
◆
Extremely fast TTFF at low signal level
◆
Multipath detection and suppression
◆
Accuracy 2.5m CEP
◆
Tracking current ~35mA
◆
Supports active and passive antenna
◆
Operating temperature -40 ~ +85ºC
◆
RoHS compliant
Applications
Applications
Applications
◆
Personal positioning
◆
Navigation
◆
Smart Phone
◆
Automatic Vehicle Location
Product Description
Product
The CAN6-CT6 is a small form factor GPS module solution intended for a broad range of
Original Equipment Manufacturer (OEM) products, where fast and easy system integration
and minimal development risk is required. The user only need to provide DC power of 3.0V ~
3.6V and GPS signal; the CAN6-S will output navigation solution in standard NMEA-0183.
The CAN6-CT6 features 48 channel GPS receiver with fast time to first fix and improved
-148dBm cold start sensitivity. The superior cold start sensitivity allows it to acquire, track, and
get position fix autonomously in difficult weak signal environment. The receiver's -163dBm
tracking sensitivity allows continuous position coverage in nearly all application environments.
CAN6-CT6
Advertisement
Related Manuals for CanMore CAN6-CT6
Summary of Contents for CanMore CAN6-CT6
- Page 1 Product Description Product The CAN6-CT6 is a small form factor GPS module solution intended for a broad range of Original Equipment Manufacturer (OEM) products, where fast and easy system integration and minimal development risk is required. The user only need to provide DC power of 3.0V ~ 3.6V and GPS signal;...
-
Page 2: Receiver Specification
Receiver Specification ◆ Electrical Spceification Parameter Unit Power Supply (VDD) Backup battery voltage(VBAT) Supply Current for not 3D fixed Supply Current for 3D fixed RF out power for ANT(VRF) ◆ DC Electrical characteristics Paramter Symbol Min Units High Level input Voltage 0.7*VCC Low Level input Voltage -0.4... - Page 3 Product Dimensions Dimensions : 16mmX12.2mmX2.6mm...
-
Page 5: Pinout Description
Applicaation circuit : GPS Ative antenna specification (option) Frequency 1575.42MHz GAIN 18~28dB 50Ω Output Impedance Noise Figure Polarization RHCP Antenna Voltage Pinout Description : Name descripton 1,4,5,6,7,8,14,1 No connection 5,16,17,18,19 1pps One-pulse-per-second (1PPS) time mark output, 3V LVTTL. The Pin provides one pulse-per-second output , when getting 3D position fix. - Page 6 UART serial data output, 3V LVTTL. One full-duplex asynchronous serial UART port is implemented. This UART output is normally used for sending position, time and velocity information from the receiver in NMEA-0183 format. When idle, this pin output HIGH. UART serial data input, 3V LVTTL. One full-duplex asynchronous serial UART port is implemented.
-
Page 7: Pcb Layout
PCB Layout The signal path from antenna to RF input of CAN6-CT6 is the most critical part of application design. The goal is to provide optimal 50-ohm match between a 50-ohm antenna and the module 50-ohm RF input for maximum power transfer. The 50-ohm grounded coplanar wave guide, consisting of the RF input signal with RF ground on either sides and a RF ground underneath, is a good choice for efficiency. -
Page 8: Smt Reflow Profile
SMT Reflow Profile : The reflow profile shown above should not be exceeded, since excessive temperatures or transport times during reflow can damage the module. Cooling temperature fall rate: max 3°C /...