Installation Instructions - Hans Grohe AXOR Citterio 39453 1 Series Installation Instructions / Warranty

Installation Instructions

The water supply must be turned off at the main prior to
installation of this kit.
•
Remove the plastic plaster shields from
the valves and the spout tee. Use a
phillips head screwdriver to remove the
screws from the white plastic handle
snap connectors. Remove the snap
connectors.
•
Pull upward on the handshower holder
plaster shield. Pull the outer Secu-flex hose
completely away from the deck. Unscrew
the white plastic winged nut from the
bottom of the Secu-flex hose. Put the outer
hose away in a safe location. Be ex-
tremely careful to prevent the high pressure
hose from falling back beneath the tub.
•
Remove the brass plug from the end of
the high pressure hose. Attach the
chrome inner Secu-flex hose. Use the
enclosed Hansgrohe Color towelette to
clean and lubricate the inner hose.
Have a co-worker use the towelette to
clean and lubricate the ends of the
outer hose.
use a soft cloth sprayed with a silicon
lubricant.
If the towelette is missing,