Hans Grohe AXOR Citterio 39453 1 Series Installation Instructions / Warranty
Hide thumbs
Also See for AXOR Citterio 39453 1 Series:
- Installation/user instructions/warranty (28 pages) ,
- Installation/user instructions/warranty (24 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hans Grohe AXOR Citterio 39453 1 Series
Summary of Contents for Hans Grohe AXOR Citterio 39453 1 Series
- Page 1 Installation Instructions / Warranty Citterio 39453XX1...
-
Page 2: Technical Data
Axor Citterio four-hole roman tub set 39453XX1 Technical Data Flow rate @ 45 psi 6.0 gpm per side Handshower 2.5 gpm max. Maximum water pressure 145 psi Recommended water pressure: 14.5 - 75 psi Recommended hot water temp.: F - 140 *Some municipalities limit the maximum water temperature from the water heater to 120 below. -
Page 3: Installation Instructions
Installation Instructions The water supply must be turned off at the main prior to installation of this kit. • Remove the plastic plaster shields from the valves and the spout tee. Use a phillips head screwdriver to remove the screws from the white plastic handle snap connectors. - Page 4 • Disassemble the handshower holder as shown in the diagram. Feed the inner hose through the outer hose. Secure the outer hose at the bottom with the white plastic winged nut. Remove the plaster shield. Compress the outer hose so that the hose end connection can be grasped.
- Page 5 • Screw the sub-escutcheon rings onto the hot and cold valves.. • Press the hot and cold escutcheons over the sub-escutcheon rings. • Inspect the handles, making sure that they are aligned properly. • If the handle is not straight, remove it from the valve by grasping the barrel and turning it counter clockwise.
- Page 6 • Pull upward on the lever to remove it. Turn it approximately 60 . Reinsert it. Tighten the screw. • Reinstall the handle. • Place the spout over the diverter assembly. Insert the diverter knob and tighten. Tighten the set screw, using the enclosed 3 mm allen wrench.
-
Page 7: Troubleshooting
• Pull outward on the inner Secu-flex hose. Install a screen washer in the hose end connector. Install the handshower. • Guide the handshower back into the handshower holder. User Instructions • Turn the left handle to obtain hot water, the right handle to obtain cold water. -
Page 8: Replacement Parts
Replacement Parts handle 39292XX0 hot escutcheon sub-escutcheon cold escutcheon spout diverter knob 96774XX0 aerator spout escutcheon diverter handshower holder handshower holder escutcheon inner Secuflex hose 94148000 backflow preventer cartridge 94146000 screen washer Uno handshower 38850XX1 XX = color 00 = chrome 42 = platinum... -
Page 10: Limited Lifetime Consumer Warranty
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. - Page 11 THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse”...
- Page 12 Hansgrohe Inc. 1490 Bluegrass Lakes Parkway Alpharetta GA 30004 770 360 9880 website: www.hansgrohe-USA.com...
Need help?
Do you have a question about the AXOR Citterio 39453 1 Series and is the answer not in the manual?
Questions and answers