Configure Advanced Network Settings [Advanced] - Panasonic i-PRO WV-SPN531 Operating Instructions Manual

16 Configuring the network settings [Network]
•
To access the camera via the Internet by connecting the camera to a router, it is necessary to assign
a respective HTTP port number for each camera and address translation by using the port forwarding
function of the router. For further information, refer to the operating instructions of the router in use.
Enter [Global IP address + :
(colon) + port number] in the
"Address" box of the browser
via the Internet.
vvv.xxx.yyy.zzz:50000
vvv.xxx.yyy.zzz:50001
Internet
(WAN)
[FTP access to camera]
Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access to camera.
•
Default: Forbid
16.2 Configure advanced network settings
[Advanced]
Click the [Advanced] tab on the "Network" page. (®page 41, page 43)
The settings related to SMTP (E-mail), FTP, UPnP, HTTPS, DDNS, SNMP, Diffserv can be configured in this
section.
You can move to the setting page of a setting item by clicking the corresponding link for that setting item.
152 Operating Instructions
WAN
Global address
vvv.xxx.yyy.zzz
Cable modem
XDSL modem
Router LAN
Private address
192.168.0.254
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50000 A 192.168.0.1:50000
Private address
192.168.0.1
Port number: 50000
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50001 A 192.168.0.2:50001
Private address
192.168.0.2
Port number: 50001