Steering Friction Adjuster; Power Trim And Tilt Switch On Remote Control; Power Trim And Tilt Switch On Bottom Engine Cowling - Yamaha FT25B Owner's Manual

EMU26122

Steering friction adjuster

A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
justing screw or bolt is located on the swivel
bracket.
To increase resistance, turn the adjuster
clockwise.
To decrease resistance, turn the adjuster
counterclockwise.
EWM00040
WARNING
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
accident.
EMU32051
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch "
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position.
NOTE:
For instructions on using the power trim and
tilt switch, see pages 36 and 39.
EMU26152
Power trim and tilt switch on bottom
engine cowling
The power trim and tilt switch is located on
the side of the bottom engine cowling. Press-
ing the switch "
ZMU02288
motor up, and then tilts it up. Pressing the
switch "
down and trims it down. When the switch is
released, the outboard motor will stop in its
current position.
EWM01030
WARNING
Use the power trim and tilt switch located
on the bottom engine cowling only when
the boat is at a complete stop with the en-
gine off. Attempting to use this switch
while the boat is moving could increase
the risk of falling overboard and could
distract the operator, increasing the risk
of collision with another boat or an obsta-
Basic components
" (down) tilts the outboard
" (up) trims the outboard
" (down) tilts the outboard motor
" (up) trims the
19