Components
DN
TIP:
For instructions on using the power tilt
switch, see pages 52 and 55.
EMU31432
Steering friction adjuster
A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
juster lever is located on the bottom of the
tiller handle bracket.
To increase resistance, turn the lever to the
28
UP
DN
ZMU05579
ZMU04899
UP
port side "A".
To decrease resistance, turn the lever to the
starboard side "B".
EWM00040
WARNING
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
accident.
B
If the resistance does not increase even
when the lever is turned to the port side "A",
make sure that the nut is tightened to the
specified torque.
1
1. Nut
Nut tightening torque:
5.8 Nm (0.6 kgf-m, 4.3 ft-lb)
TIP:
Steering movement is blocked when the
●
A
ZMU05522
ZMU05523