Function Of Each Button - LG WGT9532VH Service Manual

3-3. FUNCTION OF EACH BUTTON

1) For Pump Model
(Reservation) button
• Use for laundry
reservation.
• To cancel, press
the power button.
(refer to page 28)
Vapour Mode button
• Vapour Mode can be selected
with the Stain Care, Favorite
and Cotton Wash courses.
It increases the wash
temperature to 60Deg C for
a short period of the wash
cycle.
• Vapour Mode is automatically
selected with the Allergy
care course.
Agitation strength button
• Allows a higher agitation
intensity.
• It is set to Medium intensity
by default (Select is off.)
Select Intensive Wash
by pressing the button.
(Can be set on all courses
except Delicates, Quiet
Wash and Tub Clean.)
• To select hot water, cold water, or warm water washing.
• Can be changed during operation.
• If hot wash is selected, the wash is done at the temperature that your hot
water tap is set to and rinse will be done with warm water (hot + cold).
• The preset water temperature for Delicates is Cold water only.
(The laundry can be damaged if Hot water is used)
• Warm water (Hot + Cold Wash)is automatically selected on the stain care,
Allergy Care, Smart Rinse and Tub Clean cycles.
NOTE
* For optimizing the washing algorithm, the displayed time may change during washing-increased by a maximum
of 10 minutes (not including spin irregularity correction time) or decrease by a maximum of 4 minutes.
* The Vapour Mode option cannot be used with all cycles.
* Vapour may not be clearly visible during the Vapour Mode cycles.
This is normal. Too much vapour could damage clothing.
* Do not use Vapour Mode with delicate fabrics such as wool, silk, or easily discolored fabrics.
Wash Status display
Time Delay
• Laundry progress is indicated here.
• A flashing indicator means that the
process is in operation, an indicator
which is on but not flashing means
it is awaiting that process and
process indicators that are not lit
means that the process is complete
or was not selected.
Hot and cold wash laundry button
time, and error message display
• During operation this indicates the
• If there is a malfunction, the error
16
Remaining wash, reservation
remaining wash time.
message will be displayed to assist
in troubleshooting the problem.
Water Level button and
Detergent amount indicator
• Press to manually select
the Water Level.
• It can be changed during
operation.
• Detergent indicator
suggests the recommended
powdered detergent
amount to add.