Function Of Each Button - LG WTS18DHM Owner's Manual

Function of each Button

Time Delay
(Reservation) button
• Use for laundry
reservation.
• To cancel, turn
power off.
(refer to page 26)
Steam button
• Use for steam.
• Steam can be selected
under Normal, Stain
care, Favorite course.
• Steam is automatically
selected under Allergy
care course.
Water wave button
• To control water wave.
• Initially set at "medium"
but will not be indicated.
To control Strong wave
power, press Strong wave.
(all course except
Allergy Care, Delicates,
Silent and Tub Clean
can adjust wave.)
Hot and cold wash laundry button
• To select hot water, cold water, or hot and cold water.
• Can be changed during operation.
• If hot wash is selected, laundry will be done with hot water and rinse will
be done with cold water.
• Only cold water will be used at Delicates course.
(It might damage laundry if Hot water is used)
• Hot and cold water makes appropriate temperature by mixing hot water and
cold water adequately when Hot water and cold water is selected.
Stain care and Allergy Care course have higher set temperature.
So they use more hot water than other course.
• Hot wash, cold wash is automatically selected under stain care, Allergy
Care, Smart Rinse and Tub Clean course.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be
same to the washing habit of a specific user. So, it does not matter that the user uses it according to her/his
washing habit.
* The steam option cannot be used with all cycles.
14
Display laundry
progress
• Laundry progress is
indicated here.
• Process to be done will
have light on. Process in
progress will blink and
process already done
will have light off.
Display remaining time, reservation time,
and alarm for trouble
• During operation this indicates time to finish of
laundry.
ex) indicates remaining time of laundry,
rinse, spin dry during operation/pause.
• If there is a trouble, it blinks with buzzer sound
and indicates the source of trouble. It will work
normally after troubleshooting.
(display detergent amount)
• Use to adjust Water Level.
• It can be changed during
operation.
• Add detergent as much as
indicated amount next to
Water Level.
• Detergent is based on
condensed detergent.
Water Level button