Page 1
MANUAL ENGLISH Parcan 36, pinspot with color wheel set Ordercode: 30207 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
Your shipment includes: Showtec Parcan 36, pinspot with color wheel set with a Schuko power cable (1 m) Color wheel ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Parcan 36, pinspot with color wheel set Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. • The minimum distance between light output and the illuminated surface must be bigger than 0,5 meter.
Page 6
Parcan 36, pinspot with color wheel set The Parcan can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place.
Parcan 36, pinspot with color wheel set Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused.
Parcan 36, pinspot with color wheel set Installing the Lamp The Showtec Parcan 36 uses the Par 36 G53 Screw VNSP GE lamp, 30W (ordercode 80101) and the Par 36 G53 Screw VNSP Showtec lamp, 30W (ordercode 82160). Use only the appropriate lamp for your unit.
Parcan 36, pinspot with color wheel set Installing the Color Wheel and the Color Wheel Motor 01) Use the included screws to fit the color wheel to the color wheel motor. 02) Fit the color wheel motor to the housing of the Parcan 36 and tighten the screw. Fig.
Parcan 36, pinspot with color wheel set Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply.
04) If you are unable to determine the cause of the problem, do not open the Parcan, as this may damage the unit and the warranty will become void. 05) Return the device to your Showtec dealer. Problem Probable cause(s) Solution •...
Parcan 36, pinspot with color wheel set Product Specifications Model: Showtec Parcan 36, pinspot with color wheel Input voltage: 240V AC, 50/60Hz Power consumption: Max. 30W Lamp socket: Housing: Metal & flame retardant plastic Color wheel motor: 110-240V AC, 50/60Hz...